Sealed wheel bearings and spacers for Peter Lynn Buggies or any buggy using the same (Danish) plastic molded 8x4" hubs (Flexifoil are similar).

The bearings are sold individually but two are needed for each wheel.

One wheel spacer is needed for each wheel and are placed inside the hub between the bearings to take up the compression load from the axle bolts.

Front fork spacers are also sold individually but two are needed for each front wheel.  They are mounted on the axle bolt outside of the wheel hub between the fork tube and bearing on each side.  These are included when you buy a new front axle bolt or whole fork assembly (which includes the axle bolt).

Call us for bearings for older models- we can get them in a couple of days.

**Note:  Some of our buggy hardware parts are sourced locally but to the same grade and engineering specifications as the original parts.  We buy only from commercial industrial suppliers (no hardware-store-grade here) who know how to source, identify and supply parts of the proper grade, quality and specifications.  This is done with the original manufacturer's knowledge and support, since they know that it is not always practical to source parts from overseas to the 'States.